Bituminous membranes, liquid-applied waterproofing, PVC synthetic membranes and drainage solutions.
Areas of Use. In the waterproofing and vapour proofing of wet areas. In the terrace roofs, sloped concrete roofs, shear walls and foundations of buildings, and in the insulation of retaining walls and basement walls to achieve water impermeability. As a first-layer waterproofing membrane for lightweight metal roofs. As a first layer in the waterproofing of rain gutters, balconies, planters, the interiors of concrete channels and garden terraces.
Product Features. High resistance to cracking and puncturing. High flexibility thanks to SBS elastomeric bitumen. Reliable bonding thanks to self-adhesive partial strips. Easy and fast application. Protection of the layer beneath the membrane from the torch flame thanks to a 4 cm wide self-adhesive area at the overlap. Lower membrane surface protected with a siliconised film. Polyester-glass fibre composite reinforcement (180gr/m2). Thickness: 4 mm
Extradach Speed Profile System. Extradach Top 5.2 Speed Profile SBS (1x5m) is an SBS elastomeric bituminous membrane used to create reliable waterproofing under all harsh climatic and construction conditions. In double-layer terrace roof applications, it can be used even on timber or steel substructures that are not as stable as concrete.
1-Siplast Premium Primer on vertical surfaces. 2-Siplast Premium Primer on the concrete surface. 3-Torch-applied Preflex base membrane (torched at the overlaps). 4-Torch-applied Preflex edge reinforcement membrane on vertical surfaces. 5-Torch-applied Graviflex top membrane. 6-Torch-applied Graviflex top membrane on vertical surfaces. 7-Draina G10 drainage board (loose-laid). 8-Screed concrete. 9-Reinforced screed on vertical surfaces. 10-Loose-laid Canopia Filter. 11-Soil and landscaping
Supracoating RLV polyurethane bituminous liquid waterproofing membrane (15 kg). Used on new and refurbishment roofs, in applications where torch work is too hazardous or prohibited, or for waterproofing difficult roof details. Applied in situ as a two-coat system on concrete or timber board surfaces together with Parathane MAT (0.15x10m).
Teranap System. TERANAP TP (2x10m) is a 2 m wide SBS elastomeric bituminous waterproofing membrane. It is manufactured with a special reinforcement and compound to resist hydrostatic pressure of up to 7 bar and chemical attack. Product Features: High tensile strength. Resistance to static puncture.
BTM Elastobit is a highly elastic waterproofing membrane with a glass fleece or polyester felt carrier, produced from SBS (styrene-butadiene-styrene) modified bitumen, coated on both the top and bottom surfaces with PE (polyethylene) film, and applied by torch or hot asphalt. Areas of Use: Structures
BTM Drainage is a drainage and protection material with a dimpled profile produced from high-density polyethylene. BTM Dimpled Drainage Board Made of High-Density Polyethylene. In waterproofing systems, once the building elements have been made watertight with polymer-bituminous waterproofing membranes,
Ekoser: Economical Waterproofing Membrane. Paper-carrier under-tile waterproofing membrane, supplied in 20 m² rolls (1 m wide, 20 m long), covering a net area of 18 m². Coated with polyethylene on the top and bottom surfaces. Modified bitumen 350 g/m². Ekojüt: Economical Jute Waterproofing Membrane. Paper-carrier under-tile waterproofing membrane
Flexobit Membrane, highly elastic and with self-healing properties. Up to 1000% elongation and recovery. Can be worked three-dimensionally. Homogeneous 5 mm thickness. No filler, no carrier. Joints with the same properties as the membrane itself. High static and dynamic puncture resistance (self-healing capability).
HDPE (High-Density Polyethylene) Geomembrane is a material widely used in waterproofing, environmental protection and construction projects. The properties and areas of use of HDPE Geomembrane are as follows: 1. Water Impermeability: HDPE Geomembrane has water-impermeable properties. It is used in many areas such as water storage ponds,
Cosmofin GG L Membrane System. Cosmofin GG L is a premium PVC waterproofing membrane with high UV resistance and a special reinforcement combination in the center. It can be applied by mechanical fastening and by the loose-laid method under ballast.
Used on sloped roofs for waterproofing beneath the roof covering material (tile, shingle, etc.). BTM Under-Tile is a waterproofing membrane with a glass fleece or cellulose fiber carrier, produced from oxidized bitumen, with a polyethylene film on the bottom surface and a polypropylene scrim on the top surface, applied with wide-headed nails.
Area of Use. BTM Waterproofing Membrane Levobit is used on the terrace roofs of buildings, on sloped concrete roofs, and to achieve water and moisture impermeability in retaining walls and foundations. Designed for temperate climates, it is used as an underlay and intermediate-layer membrane in waterproofing. In wet areas such as bathrooms and kitchens
İzotop L 500 Liquid Membrane is a single-component, ready-to-use, solvent-based waterproofing material. With the flexibility and excellent adhesion it provides, it forms a seamless surface without joints on the horizontal and vertical surfaces to which it is applied, delivering definitive, long-term resistance to water and moisture.
Vapor Control, Moisture Barrier and Vapor Retarder Solutions. Ruboser®, developed to increase the durability, energy efficiency and comfort of structures exposed to heavy rain, cold, moisture and vapor, moves vapor away from the structure and thereby prevents the building elements from corroding over time.
Plastobit is a waterproofing membrane with a glass fleece or polyester felt carrier, produced from APP (atactic polypropylene) modified bitumen, coated on both the top and bottom surfaces with PE (polyethylene) film, and applied by torch. Areas of Use: On the terrace roofs of buildings, on sloped concrete roofs, on retaining walls
Ravago Building Solutions
A new-generation elastomeric polymer-bitumen waterproofing membrane with a non-woven polyester carrier and enhanced -25°C cold flexibility, designed for single-layer application.
An elastomeric polymer-bitumen waterproofing membrane reinforced with TPU in addition to SBS, engineered for single-layer use on new terraces and terrace refurbishment.
BTM
Poseidon is a new-generation waterproofing membrane that differs from conventional modified-bitumen sheets. Its compound contains no oxidised, SBS or APP modified bitumen — it is an elasto-plastomeric product, applied as a single layer on terrace and sloped concrete roofs.
A double-carrier proof membrane system designed for single-layer waterproofing of foundation slabs, eliminating the need for a protective screed.
A peel-and-stick membrane with a composite polyester carrier, designed for single-layer proof waterproofing of vertical single-sided formwork.
A self-adhesive, cold-applied waterproofing membrane faced with a cross-laminated HDPE film, requiring no torch.
A 50 cm wide elastomeric polymer-bitumen expansion-joint tape with a 20 cm flexible aluminium foil strip along its centre.
An APP-modified, polyester-reinforced waterproofing membrane developed for single-layer installation directly beneath hot asphalt on roads, bridges and viaducts.
SBS-modified polymer bitumen waterproofing membrane with increased flexibility and extended service life.
APP-modified polymer bitumen waterproofing membrane with extended service life.
Root-resistant bituminous waterproofing membrane designed for green roofs and planted terraces.
APP-modified polymer bitumen waterproofing membrane for all roof and foundation applications.
SBS-modified polymer bitumen waterproofing membrane for all roof and foundation applications.
APP-modified polymer bitumen waterproofing membrane offering an economical solution for roof and foundation applications.
ODE Yalıtım
A range of bituminous waterproofing membranes made from APP and SBS modified bitumen, with cold flexibility values from -5 °C down to -30 °C.
A family of APP- or SBS-modified polymer bitumen waterproofing membranes with glass fleece or polyester carriers.
A family of polymer-modified bitumen waterproofing membranes with glass fleece or polyester carriers, produced either by thickness or by unit weight.
A complete green roof waterproofing system built from Epikon Antiroot root-resistant membranes, drainage boards and non-clogging filter fleece.
A complementary product range comprising a bituminous emulsion primer and single- and two-component elastic waterproofing coatings.
A complementary waterproofing range of bitumen- and polyurethane-based primers together with cold-applied liquid membranes.
Dörken Delta
Economical dimpled protection sheet for blinding-concrete replacement, foundation wall protection and seepage water drainage.
Mega Insulation Solutions
A liquid-applied, elastomeric resin-based waterproofing material for use beneath ceramic tiles.
Bostik
Three-layer flexible waterproofing membrane for use beneath ceramic and natural stone finishes.
Two-component, fibre-reinforced rubber-bitumen thick waterproofing coating for below-ground and ground-level reinforced concrete structures.
UV-resistant, ready-to-use elastomeric liquid waterproofing membrane produced to TS EN 14891:2012.
Self-spreading, bitumen- and solvent-free SMP based ready-to-use waterproofing membrane for horizontal surfaces.
One-component, solvent-free polyurethane primer and damp-proof coating for absorbent and non-absorbent substrates.
One-component, UV-resistant, liquid-applied polyurethane waterproofing membrane.
Two-component, polymer-modified flexible cement-based waterproofing mortar for positive-side application only.
Single-component solvent-borne transparent polyurethane primer that boosts adhesion on absorbent and dusty substrates.
Two-component, UV resistant, white, extra flexible cement based waterproofing mortar.
A one-component, cement-based crystalline waterproofing mortar that forms insoluble crystals inside the capillaries of concrete and can be applied from both the positive and the negative side.
A solvent-free, rubber-modified, two-component polymer bitumen waterproofing coating developed for concrete structures below ground level.
A solvent-free, rubber-modified, ready-to-use flexible bituminous waterproofing coating for positive-side protection of foundations, retaining walls and basements.
Two-component, UV resistant, extra flexible cement-based waterproofing mortar.
Two-component, extra flexible, cement-based waterproofing mortar.
Two-component crystalline waterproofing mortar for both positive and negative side.
Two-component, semi-flexible, cement-based waterproofing mortar.
Ready-to-use, super elastic MS Polymer based multi-purpose waterproof membrane.
Weber
Cement-based, two-component, semi-elastic waterproofing mortar (class CMP).
Cement-based, two-component, fully elastic waterproofing mortar (class CM01P).
Cement-based, fully elastic waterproofing mortar with enhanced UV resistance (class CMO2P).
Cement-based crystalline waterproofing mortar.
Polyurethane-based, UV-resistant, super-elastic waterproofing product.
Polymer-modified bitumen rubber-based, single-component waterproofing material.
Cement-based, very fast-setting water plugging mortar.
Elastic waterproofing tape.
Fixa
A single-component, ready-to-use, UV-resistant coating and waterproofing material made with MS Polymer hybrid technology, free of solvents and isocyanates.
A single-component, self-flowing, UV-resistant coating and waterproofing material based on silane-terminated hybrid polymer technology, free of solvents and isocyanates and suitable for light foot traffic.
A cement-based crystalline waterproofing material that reacts with water and moisture to penetrate deep into concrete and can be applied against both positive and negative hydrostatic pressure.
A polymer-reinforced powder sealing material for stopping and repairing active water leaks that hardens within 3-4 minutes once mixed with water.
A super elastic, two-component cement and acrylic based waterproofing material resistant to positive water pressure.
A semi-elastic, two-component cement and acrylic based waterproofing material resistant to positive water pressure.
A highly flexible, single-component, UV-resistant waterproofing material based on acrylic (elastomeric) resin.
A single-component, water-based waterproofing material made from modified bitumen and rubber that forms a water- and moisture-resistant layer once cured.
A single-component, moisture-curing bitumen and polyurethane waterproofing material that bonds strongly to the surface to form a water- and moisture-resistant layer.
A single-component, ready-to-use, UV-resistant, solvent-based polyurethane coating and waterproofing material that can be walked on.
Contact us for a free survey, technical consultancy and a fast quote.
444 74 91
0530 941 44 74
info@niltiritoglu.com.tr
Demirciler Sitesi Samsun Yolu No:46 Siteler / Ankara
