High energy-efficiency thermal insulation with XPS, EPS, carbon EPS, rock wool and mineral wool.
Polystyrene: An organic material derived from petroleum. Its structure of numerous cells containing 98% trapped air gives the material a very high thermal insulation capability. Applications and Properties: A ceiling and floor element made of polystyrene, offering high thermal and sound insulation. Its material structure
Glass Wool is manufactured by melting basalt at high temperatures and drawing it into fibres. The raw material of the product is domestic. Depending on the application, the temperature and pressure to which it will be exposed, it can be manufactured in loose-fill, board, blanket and pipe forms using different thicknesses, densities, binder ratios and facing materials.
Carbon External Facade Insulation Board. A high thermal-insulation external facade insulation board made of expanded polystyrene rigid foam. It provides strong thermal insulation, does not lose its shape, is easy to apply, is waterproof and has ecological properties. With its carbon support, it blocks heat exchange. It provides 25% better insulation than equivalent materials. It contains no argon gas, one of the gases most harmful to human health.
BENEFITS. Used in curtain-wall facade insulation. Low lambda value 0.035. Reaction-to-fire class A1. Provides a high contribution to sound insulation. Its binder contains no phenol or formaldehyde. It has minimal dusting and does not cause itching. It is repellent to water droplets.
BENEFITS. Used in standing-seam roof and facade insulation. Low lambda value 0.037. Reaction-to-fire class A1. Provides a high contribution to sound insulation. Its binder contains no phenol or formaldehyde. It has minimal dusting and does not cause itching.
Rock Wool Wall Board. Rock Wool Partition Board. Rock Wool Facade Board. Rock Wool Roof Blanket
Thanks to the low thermal conductivity of XPS/Polyboard, it can be used with thinner external walls. It therefore provides more space in interiors. Water resistance: Because XPS/Polyboard is closed-cell, it absorbs no water at all. For this reason, it is used with confidence in inverted roof systems and in the external insulation of below-ground basement walls.
Ravago Building Solutions
Extruded polystyrene (XPS) thermal insulation board produced for external wall insulation, suitable for ETICS and cladding facade systems.
Extruded polystyrene (XPS) board developed for internal wall insulation, its rough surface providing a suitable substrate for plaster and plasterboard finishes.
Extruded polystyrene (XPS) thermal insulation board for intermediate floor slabs and for use beneath underfloor heating systems.
XPS board developed for terrace roofs, earth-retaining foundation walls and cold stores, retaining its performance under continuous mechanical loads.
High-temperature ceramic fiber blanket made from zirconia, silica and alumina based fibres, suitable for industrial furnace and boiler insulation.
Loose-fibre bulk ceramic wool used as the basic raw material in the production of formable and vacuum-formed panels and moulds.
A stone wool mattress sewn onto galvanised wire mesh, providing thermal, acoustic and fire insulation for industrial equipment exposed to high temperatures.
A family of class A1 stone wool boards derived from volcanic rock, combining thermal and acoustic insulation with fire safety in a single product.
A 150 kg/m³ high compressive strength stone wool board used beneath render on external facades in ETICS applications.
An unfaced stone wool board in 40 and 50 kg/m³ densities, installed between load-bearing constructions and partition or party walls.
An unfaced stone wool board at 110 kg/m³ density used beneath screed for impact sound and vibration insulation.
An unfaced stone wool board at 150 kg/m³ density with high compressive strength, applied over the vapour barrier on flat roofs.
A composite stone wool board laminated to plasterboard on one face, produced with or without foil, for internal insulation applications.
A stone wool board faced with aluminium foil on one side, produced for the external insulation of air conditioning and ventilation ducts.
A bare stone wool board used for thermal, acoustic and fire insulation in industrial areas at service temperatures up to 760°C.
A stone wool insulation material in board and mat form, used to retain heat in domestic and industrial ovens.
A bare or aluminium foil faced stone wool roof mat, laid between purlins in pitched roof applications.
A pre-formed stone wool pipe section, bare or aluminium foil faced, used for mechanical services insulation.
Loose stone wool supplied in 20 kg packs, packed by stuffing into cavities where boards and mats cannot be installed.
ODE Yalıtım
An A1-class glass wool insulation material produced as blankets and boards for thermal insulation, sound insulation, acoustic treatment and fire safety.
An A1-class stone wool insulation material containing 97% natural fibre, produced by melting basalt rock at high temperature and spinning it into fibres.
An installer-friendly, environmentally conscious mineral wool partition board developed with a special production technology for thermal, acoustic and fire insulation.
An extruded polystyrene (XPS) thermal insulation board produced to EN 13164 in PRM and STD grades with DT, MD and BD surface types.
A closed-cell insulation material made of elastomeric rubber foam in sheet and tube form, providing thermal insulation and condensation control in HVAC installations.
A flexible polyurethane foam used for sound insulation and acoustic treatment applications.
Mega Insulation Solutions
Stone wool board that provides sound and thermal insulation plus A1 class fire safety in lightweight partition wall systems.
Stone wool facade board providing thermal, acoustic and fire insulation in ventilated curtain wall systems.
Unfaced A1 class stone wool board for rendered external wall insulation (ETICS) systems.
Stone wool board used in industrial plants, process equipment and prefabricated sandwich panel applications.
Product group of stone wool duct board and preformed pipe insulation developed for HVAC ducts and process pipework.
A1 class stone wool roof board with high compressive strength for trafficable and non-trafficable flat roofs.
110 – 120 kg/m³ stone wool board providing impact sound, thermal and vibration insulation in floating screed floors.
Extruded polystyrene insulation board with a smooth skinned surface, shiplap edges and high compressive strength.
Extruded polystyrene insulation board whose rough or rough-grooved surface gives high adhesion to render and adhesive.
A lightweight ceiling and floor infill element made of expanded polystyrene, providing high thermal and acoustic insulation.
An under-screed insulation panel made of expanded polystyrene foam that holds underfloor heating pipes in place.
A graphite-enhanced grey, closed-cell EPS thermal insulation board used in external wall insulation (ETICS) systems.
A white EPS thermal insulation board cut from polystyrene blocks and used in external wall insulation (ETICS) systems.
A gypsum-board-faced stone wool panel that combines acoustic and thermal insulation in a single product.
Dalsan Alçı
Class A1 mineral wool insulation supplied as a blanket, pre-cut to match drywall stud spacings for thermal and acoustic insulation.
Cement-based, polymer-modified adhesive mortar for bonding XPS, EPS and stone wool thermal insulation boards to wall surfaces.
Polymer-modified, fibre-reinforced cement-based base coat render applied with mesh over thermal insulation boards.
Bostik
Water-repellent, cement-based ETICS base coat render for mesh-reinforced application over EPS and XPS insulation boards.
Mineral-based, polymer-modified white cement finishing render that produces a paint-ready decorative surface.
A cement-based external thermal insulation adhesive complying with TS 13566, used for bonding EPS and XPS insulation boards to mineral substrates.
A gun-applied aerosol polyurethane foam developed for bonding thermal insulation boards to walls and ceilings.
Contact us for a free survey, technical consultancy and a fast quote.
444 74 91
0531 734 37 11
info@niltiritoglu.com.tr
Demirciler Sitesi Samsun Yolu No:46 Siteler / Ankara
